Speicalty Fixtures and Accessories
Please scroll down to see products
or use bookmarks:
Fince Device for Wet Paper Testing (for sample width max 25 mm)
Please note: Upper fixture (TG34) is ordered seperately
This specialised test fixture complies with the standard for tensile of wet paper in accordance with TAPPI T456 om-87, ASTM D 829, ISO 3781-1983, EN 12625-5 and BS2922 Part 2:1984. For use in conjunction with top grip TG34. Maximum sample width is 25 mm (0.98 in).
Capacity
500 N, 112.5 lbf
Packaging
Lower water bath fixture only. Used with TG34 grips (order separately).
Applications
Loop tensile tests of wet paper in accordance with recognised standards.
Applicable Standards
TAPPI T456 om-87, ASTM D 829, ISO 3781-1983, EN 12625-5 and BS2922 Part 2: 1984 (Determination of the tensile strength of paper and board after immersion in water).
Description
The Puncture Test Jig consists of a circular frame 50 mm, 2.0 in diameter, with
three equidistant clamps around the circumference, and a metal probe 20 mm,
0.8 in diameter which punctures the film. TG73/80 has an 80 mm, 3.0 in
diameter frame and a 12.5 mm, 0.5 in diameter probe.
Specification (TG73/50)
- Maximum Capacity 500 N 112.4 lbf
- Minimum Load Cell 20 N 4.5 lbf
- Aperture Diameter 50 mm 2.0 in
- Probe Diameter 20 mm 0.8 in
- Temperature Limits Ambient Ambient
Specification (TG73/80)
- Maximum Capacity 500 N 112.4 lbf
- Minimum Load Cell 20 N 4.5 lbf
- Aperture Diameter 80 mm 3.0 in
- Probe Diameter 12.5 mm 0.5 in
- Temperature Limits Ambient Ambient
Applications
Puncture testing of thin plastic film
